Zipper pull lock - Anti theft/pickpocketing bag, suitcase and backpack travel and commute zip clip
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.10 – €0.12 net (excluding VAT)
For file: zipper pull lock_0.4n_0.2mm_PETG_COREONE_8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lock two zippers together to make it difficult for thieves to open your bag without being noticed.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 210
- Makes
- 0
- Views
- 849
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Opens sideways when the nut is not tightened and the nut stays attached (and will not get lost) even when unlocked. Lets you open your bag with ease using two hands while at the same time making it more difficult for pick-pocketers to open your bag discretely.
Features
Easy to use - insert zipper pulls into the loop and fasten the nut.
Small - only 3cm long and unlikely to tangle or get caught on something.
Strong - can handle the pull of several kg.
Requires only 1.3g of filament - put leftover filament to good use.
Discrete and inconspicuous - does not scream "I have a laptop and other valuables".
Can be used as a zipper pull handle when not holding two zipper pulls together.
Print settings
Works best with PCTG or PETG. Can be printed with PLA though it will be tougher to use (PLA+ will be best as it is more ductile than standard PLA).
0.2mm layer height.
3 perimeters.
100% infill.
No brim and no supports.