1 / 4
IKEA Skadis 18x18 M4 mount for Multifunction Arm mounting system (small) — image 1
1 / 4

IKEA Skadis 18x18 M4 mount for Multifunction Arm mounting system (small)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Skadis mount for the small arm system from RostaP's Multifunction Arm mounting system. Screws onto any 18x18 M4 piece.

Rating
5 / 5
Likes
16
Downloads
32
Makes
1
Views
282
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

IKEA Skadis mount for the small arm system from RostaP's Multifunction Arm mounting system.


This is a remix of the screwless version of LayerCake's IKEA Skadis Xbox One Controller Holder, modified to mount to any 18x18 M4 holder piece from the small arm system using 4 M4x12 screws.

This remix also has a spot for two M5 nuts to securely fasten the mount onto the pegboard. Use M5x12 bolts.

The hook parts remain the same as in the original model. Print hooks on their side for sturdiness.

Assembly instructions

Place two M5 hex nuts in the cover, and slide the hooks into the left and right edges of the cover. Arrow points up and hooks point down.

Snap the lock into place, arrow pointing up.

Use four M4x12 bolts to screw the mount onto an 18x18 M4 holder piece. I used this hinged holder for my mount.

Hang the mount onto the Skadis pegboard, then screw two M5x12 bolts from the back of the board into the mount.

Tags