AI HMS Hydra Edge 44 Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for Aquaillumination Hydra Edge 44 to mount to HMS rails.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
This is a bracket that slides onto the HMS rail system to hold a Hydra 44 Edge fixture. Print one for each side. Could work on larger Hydra Edge fixtures, but I don't have one to verify.
Requires - (2) M8x1.25 x 12MM cap head bolts
Print settings -
Filament - PETG
Layer Height - 0.2
Infill - 50% Gyroid
Perimeters - 3
Supports - Build plate only (supports shoulder in bolt hole)
Your printer needs to be well tuned, as this is a tight fit (was intentional as I don't want my fixtures falling in my aquariums).
I have brackets for the AI Primes as well, those can be found under my models page.