1 / 2
Unifi G6 Entry Wedge Mount — image 1
1 / 2

Unifi G6 Entry Wedge Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A wedge mount for Unifi G6 entry modeled after the included one but with greater tilt.

Rating
0 / 5
Likes
0
Downloads
68
Makes
0
Views
251
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

The wedge mount that comes with the Unifi G6 Entry was too shallow. Modeled a wedge mount based on the original to provide more tilt. The one in the pictures is a 40-degree tilt.

Have uploaded a 30 and 40 degree version

Printed with 0.4mm nozzle at 0.15mm layer height. Used PETG-CF for outdoor use and dimensional stability. Depending on plastic shrinkage, can scale by 100.1-100.2

Requires 2 M3 heatset inserts. The original screws should work but I used some low-profile socket screws since I had them lying around.

Tags