Soft Jaws for 6 inch Bench Vice
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Record #6 (6 inch) Bench Vice plastic Soft-Jaws. I printed these in ABS. 18x2mm magnets are use to hold them in place.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
A pair of soft jaws for the Record No. 6 (6 inch) bench vice, designed to protect work-pieces that would be easily marked by bare metal jaws.
Material/Printing Printed in eSUN ABS+ using multi-line infill for strength. These are consumables by design — when they wear out. I used 4 wall loops with alternative extra wall set. For infill I used Rectilinear at 25% with 3 multi-fill lines and set direction to 0 degrees - check the screen grab.
If you print these, a photo helps others know they work. Consider sharing your choice of material and print settings — particularly infill, as I may have overdone that one.
Magnets 18×2mm magnets hold the jaws in place. Use minimal glue so the magnets can be recovered and reused when you print a replacement pair.
Fit Modeled to suit a 6 inch bench vice such as the Record No. 6. The magnet positions are deliberately offset to avoid the jaw screws, which are slightly recessed on my vice. Check the STEP files before printing if you want to adapt them to a different vice.
Future Development A TPU insert using the beam interlocking feature would be a useful addition for even softer clamping — noted for a future revision.
Other Soft Jaws
Check my profile for upcoming projects and follow to be notified when new models drop
Found this useful? These Soft-jaws went through a few iterations before I was happy with them. If you want to contribute to the next round of testing for the next project, it’s always appreciated: buymeacoffee.com/ChrisNZL