TopRC Odyssey Nose Wheel Well Aerodynamic Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TopRC Odyssey Nose Wheel Well Aerodynamic Cover
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
TopRC Odyssey Nose Wheel Well Aerodynamic Cover for use with the JP Hobby ER-120S Landing Gear to lessen the impact of nose down tendency due to the suction of the EDF.
It is a snug fit when you remove all excessive glue globs from the edges and clicks snugly into place, use thick CA to glue in place, preferably the kind that does not cause white vapor damage. Paint or leave as is to your preference.
Best to either print in ColorFabb or equivalent LW-PLA maximum expansion and 100 percent infill or a carbon filament like GreenTec Pro Carbon with 3 top and bottom layers and a 15 percent infill. The LW-PLA is the best for weight as it only weighs 12 grams compared to the 27 grams for the carbon printed version.
Photos installed on model will follow soon, tbc