1 / 11
Chain Conveyor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chain Conveyor 25mm widht 200mm lenght
- Rating
- 0 / 5
- Likes
- 80
- Downloads
- 555
- Makes
- 0
- Views
- 5,560
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This conveyor is 25mm wide and 20mm long.
It has M3 holes for mounting
Printing instructions:
- Print pieces flat
Assembly instructions:
- Print all conveyor parts (You need multiple conveyor belt pieces, alternating with one flat or top pieace and one bottom piece)
- Assemble conveyor parts with M2 20mm screws
- Press a 605ZZ bearing into the parts
- Place N20 motor inside the middle part, route the wires through the side hole
- Holes for M3 threaded inserst are available on the gears
- Use M5 screws to secure shafts
- Screw left right and middle together with M3 screws