CleanGrab Water Sample Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A clean way to grab a turbidity sample and verify flow without disturbing the line and skewing a sample.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — Noncommercial
Turbidimeters can clog and lose flow over time. These will help get a quick visual of the flow and allow for a sample grab without touching the 1/4" drain line. Our filters read as low as 0.013 NTU and it is very easy to contaminate water that clear, simply by touching the tube debris inside can break free. There is 3/8" NPT thread on the bottom for a push-to-connect fitting. There are multiple bracket size options, the A are flat and the B have a raised extrusion that will fit into the front of channel strut more securely.
Other than a 3/8" fitting you will need two M3x8mm stainless screws to secure the bracket to the body. The lower hole on the body back is for the middle hole on the brackets, so you can rotate it 90⁰ to the best position.
Do the bodies in 4 perimeters (or 3 with a 0.6) and the brackets 5 or 6 perimeters with more infill. The threads print fine as high as .2mm layers but you will get better results at .15mm especially with a 0.4mm nozzle.