1 / 3
Detachable Necklace Adaptor for Rodman Coin Sized Flashlight — image 1
1 / 3

Detachable Necklace Adaptor for Rodman Coin Sized Flashlight

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An alternative means to fix the steel chain to the flashlight's bracket, allowing it to swivel while worn.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
30
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

The ingeniuos and verstile mini flashlight by Rodman jumped to #1 of my EDC flashlights. It is prepared to be worn as a necklace via a small key ring through a hole in the housing. But that way it always slightly points up and into your face. And let me tell you: this thingy is too bright for that.  I designed this adapter so the chain can be attached at the magnetic bracket of the flashlight, introducing three new functionalities:

  1. By this way of guiding a chain, the flashlight can not longer flip over from back to front

  2. The swiveling funcionality of the bracket can be used to point the flashlight further down to avoid blinding and illuminate where you are going

  3. The flashlight is easily detachable for using it as a worklight while maintaining a strong enough magnetic grip to not fall off by itself

I intentionally designed it to resemble a police badge, inspired by one of the strobe modes of the flashlight.

Find your best printing orientation. I printed it standing upright on the small side, which provided the most rigidity in the direction of the main force vector. My H2D managed to pull that print off without supports. Tolerances are optimized for PETG. You need a 15 x 4 x 4 mm 45M neodymium magnet, which is superglued in the fitting recess.

Have fun. Enjoy.