Steamboat Willybenchy: the first whistle in animation history
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
In 1928, a small steamboat sailed across screens for the very first time, captained by a cheerful mouse complete with a captain's hat and a built-in whistle. Almost a hundred years later, finally free from copyright, that steamboat has merged with the most printed Benchy in history, and the result is this retro black-and-white masterpiece that even puffs real steam.
Our helmsman is right there, leaning out of the cabin window, one hand raised in a wave as if he's about to whistle a tune (that part, yes, is still protected, so just stick to printing him). The paddle wheel turns slowly on the side of the hull, just like the old river steamboats of the past, while a cloud of white smoke, made of lots of small puffy spheres, rises from the black chimney in full 1920s cartoon style.
A small hook hanging from a side pole completes the scene, ready to hoist a bucket or, knowing our friend, probably about to cause some kind of mischief. The entire hull has those classic horizontal lines typical of old wooden boats, in a warm amber tone, because even a century later, some aesthetics never go out of style.
🧩 Print Specifications
Model height: 150mm (taller than a captain's hat worn with way too much confidence)
Layer height: 0.16 mm (more precise than the opening whistle that changed animation history)
Infill: 10% Lightning (hollow inside like the cargo hold of a riverboat after unloading)
Supports: yes (even the most experienced captains sometimes need a little support)
Brim: optional (just to keep the base from running off like a mischievous mouse)
Material: PLA matte white (later painted in the warm, vintage tones of the original steamboat)
Print time: about 7 hours (way less than almost a hundred years of animation history)
PLA used: about 110 g (light in weight, but loaded with retro nostalgia)
🖌 Recommended painting technique
after applying the spray primer, lay down an amber/burnt orange base coat with acrylic marker over the entire hull, followed by darker horizontal lines drawn freehand with a fine-tip brown marker, to simulate the boat's wooden planks. The cabin should be painted a slightly lighter brown, with white trim around the windows. The character requires more precision: black base for the body, ears and nose, white for the muzzle, hands and belly, with a small touch of red for the shorts. The paddle wheel and hook should be painted dark brown/grey, with a light bronze dry brushing pass to simulate worn wood and metal. The smoke should be left pure white or very lightly dirtied with a hint of light grey, keeping a matte finish for that soft steam effect.
Print it, paint it, and remember: even a mouse from 1928 can still steal the show.