Air Scrubber Fan Controller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This box houses the electronics for the 12v 4-wire fan controller for the Air Scrubber
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a box to house the components required to control a 4-wire fan used in my Air Scrubber project for my LACK enclosure.
The information is displayed on a 128x32 OLED display. https://ebay.us/rxHI4i
The control is performed by an Arduino Pro Mini (16MHz 5v). https://ebay.us/T4mzeE
The fan speed is selected by a 4 position rotary switch. https://ebay.us/NkEpef
Knob (23mm) for rotary switch. https://ebay.us/hsyoyO
The supply voltage for the fan is through a (5v) relay switched off by the Arduino. https://ebay.us/6b8B6j
Connector is 4 pin JST. https://ebay.us/Kgg9Wj
12vRocker Switch. https://ebay.us/8zmu28 I've used 90 degree spade connectors
12v to 5v buck converter. https://www.adafruit.com/product/4739 or https://tinyurl.com/5b9vddtf from Pimoroni UK.
Wiring for internal electronics 24awg. https://ebay.us/5w8QUT & https://ebay.us/QNX6Jp
The Gcode is in PETG with 0.2 layer height & 0.4 nozzle. No supports are required.
It's a fiddley assembly and I wish I had allowed more space and offset the power in and on/off switch.