Lettuce Half Flat planter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.68 – €5.72 net (excluding VAT)
For file: microgreen dark lid_1_0.4n_0.2mm_PETG_MK4S_3h27m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.20 excluding VAT (range midpoint).
- Weight reported by the author
- 109 g
- Print time reported by the author
- 3.45 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple lettuce planter to grow microgreen lettuce. Vase mode print.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This is a half-flat lettuce or petuna starter tray. It has a few hundred drain holes and the sides are corrugated to make it keep its shape when vase mode printing.
Print it hole side down, make the bottom 2mm thick with bottom layer count (for .2mm, that's 10 bottom layers). Doing this gives it stiffness. Then slice that as a vase mode print and you're off to the races.
This is the exact same model as the resizable seed sprouter cover that I have - but turn it upside down and fill it with good soil, put it in a pan of water or seed starting tray, and you'll grow lots of lettuce or flowers. Easily resizable to get even larger planting pots.