Bowten tube strain relief in TPU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Avoids a to sharp turn of the Bowden on the Fitting. Especially useful if the bowden is renforced with filament tape.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I had a sharp turn on the Hotend and this fixed it. It has large window so the bowden can be plugged and secured and vice versa while this is installed. It needs to be printed with a flexible filament, otherwise it is impossible to install it.
It was designed around a fitting with a 16mm radius and 3mm height on the Creality Spider Hotend, but surely works with others as well.
Infill max. 5% (we want it flexible). Print it with 0.1 mm layer height so the overhangs come out clean. If you use Cura, you can use adaptive layer height mode for faster printing. (layer height=0.15, AL max. Variation=0.05, AL Variation Step Size=0.01, AL Top. Size=0.1).
Attention: It requires some force to install, so dont do it while the fitting is installed on the hotend. Unscrew the fitting/hotend and then install it. Its easier and prevents damaging or de-calibrating your printer! You have been warned.
Parametric fusion 360 source file is included in case you need to make adjustments.