Switch indicator and lock for LK NES drejeafbryder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Indicator with lock for the Danish LK NES drejeafbryder
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 4
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Easy to see indicator if switch is on or off, which normally can be difficult on distance or angle.
Also possible to insert lock, with message, to prevent accidental turning switch on or off.
Easy installation
Remove two or more screws, insert mountingplate and secure with screws.
Add rotator with small ring facing out. Orientation determines if the indicator should be showing on or off state. It will the be possible to add the lock for the opposite position.
Click lid on.
Print instructions
STL files and 3mf project file.
All printed in PLA, 0.2mm layer height, with no supports.
Flag should be printed in contrast color, like green og red.
Lock insert
Blank .stl provided, so you can make your own icon/message. The .3mf contains a dual color version (can be printed on any printer)
Optional additional hardware
On some switches the screw are too short, then 2/4 M4 25mm flathead screws are needed.