Wash Paste Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.19 – €1.45 net (excluding VAT)
For file: Rod_Piston_0.4n_0.2mm_PETG_COREONE_1h21m_bed2.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.32 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 1.35 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple Wash Paste dispenser - without supports
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
This is a dispenser for hand-washing paste.
Since I always had to scoop my hand-washing paste out of a 10-liter bucket, I designed this dispenser. Its function is modeled after commercially available dispensers.
The design consists of the following parts:
Container
Piston at the bottom
Propeller for pushing the paste down
Rod
Lid
Handle
Cover for the hole in the lid
Wall mount
The rod is screwed to the piston at the bottom and to the handle at the top.
It's designed in a way that it does not require any support during printing.
Print settings
All necessary settings are already included in the All Elements.3mf file.
Alternatively, here are the required settings:
General Settings
Use PETG, 15% Cubic infill, 0.20 layer height. I've printed all Parts with the Balanced Profile.
The orientation can be found in the All Elements.3MF file.
Part specific
Container
3 perimetersPiston and Handle
Use variable layer height to achieve a layer height of 0.10 mm for the thread
3 Perimeters
Assembly
To assemble the rod, slide the propeller onto the piston, ensuring that the propeller is facing upwards. Then screw the hexagonal rod onto it. If the thread is stiff, silicone oil or silicone spray may help. Before fitting the handle, put the lid and, finally, the lid cover onto the handle and thread it on the upper side on the rod.
If you found this useful please leave a make and/or a like or support me on Ko-Fi -Thank You!