1 / 4
Palit GeForce GT 640 Custom Fan Shroud with Snap-Fits — image 1
1 / 4

Palit GeForce GT 640 Custom Fan Shroud with Snap-Fits

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

🛑READ DESC! Custom shroud for Palit GT 640. Print face-down, scale X/Y to 101% for PETG.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
43
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

🚨 IMPORTANT: PLEASE READ THIS DESCRIPTION BEFORE PRINTING AND ASSEMBLING! 🚨

To ensure a perfect fit, avoid breaking the parts, or damaging your graphics card, please follow the specific scaling and installation guidelines below!

📸 ABOUT THE PHOTOS / WARNING:

The part shown in the cover photos was printed at 100% scale. Because PETG shrinks during cooling, it came out a bit too tight and had to be manually heated up with a heat gun/hot water to stretch and safely fit onto the heatsink. If you want it to fit perfectly straight off the printer plate without manual heating, you MUST follow the scaling rule below!

📝 Description:

This is a custom fan shroud (cooling cover) for the Palit GeForce GT 640 graphics card, designed from scratch in FreeCAD. It is a perfect replacement for a broken or missing original stock plastic cover.

⭐ Key Features:

1. Snap-Fit Design: Engineered with 4 integrated triangle hooks that clip securely directly onto the stock aluminum heatsink fins. The shroud sits very tight with zero fan vibrations.

2. Custom Engravings: Features high-quality custom side text: "GeForce GT640 Custom Series" on one side and the author's signature "by ILIA_FARDZ" on the other.

3. Heavy-Duty Build: Has a solid 2.0 mm wall thickness, making the entire construction extremely durable, rigid, and long-lasting.

⚠ CRUCIAL SLICER ADJUSTMENT (Plastic Shrinkage):

- Scale X and Y to 101%: Due to PETG/ABS cooling shrinkage, you MUST scale the model to 101% on the X and Y axes (length and width) in your slicer before hitting print. Keep the Z axis (height) at 100%. This guarantees a smooth, unforced fit over the heatsink without snapping the hooks.

⚙ Recommended Print Settings:

- Material: PETG, ABS, or ASA. (Do not use standard PLA! The GPU and heatsink temperatures will soften and deform PLA snap hooks over time).

- Layer Height: 0.15 mm - 0.20 mm (Highly recommended for sharp, crisp, and clean text resolution on the side walls).

- Perimeters (Walls): Set to 4 walls to ensure maximum strength, flexibility, and lifespan for the clips.

- Infill Density: 20% - 30% (Grid or Gyroid pattern).

- Orientation: Print Face Down (with the large fan hole laying completely flat on the heatbed).

🌳 Support Settings:

- Support Type: Organic or Tree supports. They leave fewer scars and detach easily.

- Support Placement: Set strictly to "Touching Buildplate Only". This is very important so the slicer does not try to generate unnecessary supports inside your custom text engravings.

- Support Painting: For the best results, use the manual support paint tool to apply support enforcers only onto the very tips of the 4 hanging hooks.

🔧 Safe Installation Steps:

Step 1: Remove Heatsink First. To install the shroud, you must remove the aluminum heatsink from the GPU PCB first. Do not try to snap the shroud on while the heatsink is still screwed to the card. The tall capacitors near the display outputs/GPU chip will block the hooks, and you risk breaking them or damaging the electronics!

Step 2: Snap Shroud onto Heatsink. Clip your newly printed shroud onto the bare aluminum heatsink while it is detached from the card.

Step 3: Reassemble the Card. Carefully put the heatsink (now with the shroud attached) back onto the graphics card PCB, apply fresh thermal paste, and secure the screws on the back.

💡 Post-Processing:

- Stringing Removal: PETG is prone to fine hair-like stringing. Quickly pass a lighter flame or a heat gun over the text for 1 second to make the hairs instantly disappear.

Tags