Archetype Apus2 Extruder Block w/ PUG
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Breakneck compatible Archetype extruder adapter for use with the Phaetus Apus 2 extruder and Mellow Fly sht36v3
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
This mount is similar to my other model but incorporates the PUG adapter and provides better CAN cable strain relief and constraint. Tool board mounting hardware also changed.
BOM
Part | Qnty. | Part | Notes |
|---|---|---|---|
1x2mm zip tie | 4 | Tool Board | PUG retainer and cable strain relief |
m3 square nut | 3 | Tool Board | |
m3x10mm | 2 | Tool Board | |
m3x40mm | 1 | Tool Board | Tool board motor mount |
m3x16mm | 1 | Tool Board | Tool board Power plug clamp |
m3x5 BHSC | 1 | Extruder | Holds extruder to adapter on the side with filament run-out connector, closest to the motor. |
m3x8mm BHSC | 2 | Extruder | Holds extruder to adaptor on top and left sides |