Cold shoe adapter for Apple Studio Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds a standard cold-shoe interface to the top of an Apple Studio Display for mounting lights, a camera, or a microphone
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 0
- Views
- 698
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Basic adapter to add a standard cold-shoe interface to the top of an Apple Studio Display for mounting lightweight lights, a camera, or a microphone. Works fine for mounting, as examples, an Aputure MC panel light or Rode VideoMic NTG.
The 19.8 mm gap between the flanges makes for a snug but not “clamping” fit on the upper bezel/rim of the Studio display. Best to keep the center of gravity of whatever you're mounting over the mount itself.
I added a 1-2 mm clearance at the top edge of the display so the vent ports are not blocked outright. Still, I would not recommend using more than a couple of these at once – I have done no testing on the effects of blocking a significant amount of vent ports.
Printed mine oriented with the large flat face on the bed, using Prusament PETG with 0.15mm QUALITY preset, 4 perimeters, and 15% gyroid infill.