1 / 10
Luminous  Ludo game - Svítící Člověče, nezlob se! — image 1
1 / 10

Luminous Ludo game - Svítící Člověče, nezlob se!

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The simplest board game made special by luminous figures Nejjednodušší desková hra ozvláštněná svítícími figurkami

Rating
0 / 5
Likes
4
Downloads
5
Makes
0
Views
112
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Share Alike

-Český popis následuje po anglickém-

You will need a transmitting induction coil with a diameter of 20 cm. This one was used for the project: https://www.aliexpress.com/item/1005007636898843.html, however, there are a large number of them available (search for "USB 5V 0-200mm Wireless Power Supply Transmitter Coil"). Be careful, there are also smaller ones on offer, however this is the smallest possible for a functional game with a reasonable board size (i.e. so that all the figures on the playing field are lit stably). Then there are receiving coils equipped with LEDs - available at the same link. Generally, there are about 8 colors available (green, red, pink, light and dark blue, yellow, orange and white)

Now all you have to do is print the bottom and top of the game board, insert the coil so that the top side of the power supply circuit board faces up after assembly, and glue both parts together (ideally under load to prevent twisting - I used super glue). The coil itself is not glued to the game board and can move slightly. If the coil does not fit into the prepared groove, adjust its shape slightly, it may have been deformed during transportation.

Glue the printed game board pattern to the top surface of the board. Alternatively, choose any design you like, just remember that there is a "blind spot" directly above the coil, where the figures do not light up - see the orange strip drawn above the playing surface in the attached image:

The figures consist of two parts - the lower part, into which you insert the coil with the colored diode facing up, and the body of the figure itself, which "closes" the figure. The lower part was originally prepared for tight insertion, but the coil was sometimes damaged during insertion. In the presented version, the hole is large enough for loose insertion, with the coil secured in place by a drop of dispersion glue on the bottom. The lower and upper parts of the figure do not need to be glued together, they hold together by themselves.

The coil requires a 5V/15W power supply (not a fast charger). It has been proven to work well using a power bank.

The power circuit itself heats up unpleasantly during operation, until it is so hot to the touch that you cannot hold your hand on it. To prevent touching the power supply circuit, a cover house is used, which is part of the model, if you find it desirable to cover the electronics. It is also possible to stick a passive heat sink (with thermally conductive insulating tape) to the back of the power supply circuit or to create another form of passive or active cooling. However, even in this basic "bare" form, the circuit can work for hours without destruction.

Figures are printed from transparent PLA, game board and protective house from PET-G

Warning – playing in the evening twilight causes drowsiness and melancholy! (Similar effects to a campfire).

Please remember that the game board is formed by an alternating electromagnetic field - do not put metal objects in it!

-Česká verze-

Budete potřebovat vysílací indukční cívku o průměru 20 cm. Pro projekt byla použita tato:
https://www.aliexpress.com/item/1005007636898843.html, nicméně je jich k mání velké množství (hledejte „USB 5V 0-200mm Wireless Power Supply Transmitter Coil“). Pozor, v nabídce jsou i menší, nicméně tato je nejmenší možná k funkčnímu provedení hry při rozumné velikosti desky (tedy aby veškeré figurky na hrací ploše stabilně svítily). K tomu pak přijímací cívky osazené LED – k sehnání na stejném odkazu. Obecně je k dispozici cca 8 barev (zelená, červená, růžová, světle a tmavě modrá, žlutá, oranžová a bílá)

 Nyní stačí vytisknout spodní a horní díl hrací desky, vložit cívku tak, aby horní strana plošného spoje napájení mířila po sestavení vzhůru a oba díly slepit (ideálně pod zátěží, aby se zabránilo kroucení – použil jsem vteřinové lepidlo). Cívka samotná není k hrací desce přilepena a může se částečně pohybovat. Pokud vám cívka nesedí do připravené drážky, mírně její tvar poupravte, při přepravě mohlo dojít k její deformaci.

Na horní plochu desky přilepte vytištěný vzor hrací plochy. Případně zvolte jakýkoliv svůj design, jen pamatujte, že přímo nad cívkou je „slepé místo“, kde figurky nesvítí – viz oranžový pruh nakreslený nad hrací plochou na přiloženém obrázku:

 Figurky se sestávají ze dvou dílů – spodní část, do které vložte cívku s barevnou diodou směrem vzhůru a samotné tělo figurky, kterým se figurka „zavře“. Spodní díl byl původně připraven pro vložení na těsno, ale při vkládání docházelo k poškození cívky. V předložené verzi je otvor ve velikosti pro volné vložení s tím, že cívku na místě zajistí kapka disperzního lepidla. Spodní a horní díl figurky k sobě není třeba lepit, drží pohromadě.

Napájení cívky vyžaduje zdroj 5V/15W (ne rychlonabíječky). Osvědčilo se použít powerbanku.
Samotný napájecí obvod se při provozu nepříjemně zahřívá, až je na omak natolik horký, že na něm nelze udržet ruku. K zamezení dotyku napájecího obvodu slouží krycí domek, který je součástí modelu, pokud shledáte žádoucí elektroniku raději zakrýt. Dále je možné na rub napájecího obvodu přilepit pasivní chladič či dotvořit jinou formu pasivního či aktivního chlazení. Nicméně i v této základní „holé“ podobě obvod dokáže fungovat i hodiny bez destrukce.

Figurky jsou vytištěny z transparentního PLA, hrací plocha a ochranný domek z PET-G

Upozornění – hra ve večerním šeru způsobuje ospalost a melancholii! (Podobné účinky jako táborový oheň).

 

Prosím pamatujte, že hrací plochu tvoří střídavé elektromagnetické pole – nevkládejte do něj kovové předměty

Tags