Kingdom Death: Monster - Large Token / Cardboard Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for large terrain tokens / cardboard for Kingdom Death: Monster
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is an organizer for large terrain tiles and other cardboard parts.
Note this is designed to have three models stack, using magnets. The Gear Grid holder, Large Terrain Tiles Holder, and Black Knight Terrain Tiles all work together:
MAGNETS - They are 5mm diameter x 2mm high cylinder magnets. I'm using N52 magnets, which I believe are the strongest you can get.
I ended up having to glue the magnets as they will eventually pop out over time. I used Zap-A-Gap Medium CA+. I found that it does very little ghosting on the print. I use a chopped off toothpick(so it isn't pointy) dipped in the glue to apply it.
PRINTING - What's shown in the pictures was printed on a Prusa XL in an enclosure with Prusament Galaxy Black. Print settings, 0.4mm nozzle, 0.2mm layer height.
Also note the pictures are a lot lighter because my phone auto adjusted exposure. In real life they are a much darker black.