Ping Pong / Table Tennis racket, requires TPU and M5 screws and nuts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully (well, almost fully) 3D printable ping pong racket. It is quite large, probably ideal for defensive play.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 86
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Share Alike
Information
This is my first ever model on Printables, a ping pong racket! It is quite easy to assemble and takes about 300 grams of filament in total. You will need TPU for the face of the racket. If you want actual spin, you can go glue real ITTF rubbers on it.
Non-printable parts required:
2x M5 20-25mm screws
2x M5 nuts ⚠MAKE SURE THE DIMENSIONS DO NOT EXCEED 8.2MM SIDE TO SIDE
Printing instructions (handle pieces with screws):
PingPongRacketHandleTop and PingPongRacketHandleBottom parts: In your slicer, go to supports and select "Normal Manual" supports. When painting the support on, ONLY paint it on the part marked in the first screenshot:

Make sure on the Top Handle piece, you disable support inside the screw holes. This is because you will need to pause the print to insert some M5 nuts, in order to screw it together.

Add a pause on the first layer with overhang. Make sure the pause is BEFORE the layer starts.

Now, when you print, as the print pauses, drop two M5 nuts into the holes, and make sure they don't pop up above the layer, otherwise they will scratch the nozzle.
All other parts can be printed in whatever way you want, though the TPU part (PingPongRacketFaceTPU) should be printed twice. It will need supports.
Note that in the 3MF files that I provided, the pause is already there.
Assembly
Take the two TPU parts and clip them over the blade. Then lay the two handle parts over the handle part of the blade, making sure the stepped-up part fits into the TPU part, and then screw them in with 25mm M5 screws (I'm pretty sure you can also use 20mm). You're done! :)
Please like and download!
-Nam