Samurai Jack Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge of Samurai Jack standing off against Aku
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 131.9x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm
#000000 PLA Geeetech Black Transmission Distance: 0.1
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1
#ebb791 PLA Geeetech Matte Skin Transmission Distance: 3.4
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.1
#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.52mm) swap to Jade White
At layer #20 (0.92mm) swap to Mistletoe Green
At layer #23 (1.04mm) swap to Skin
At layer #34 (1.48mm) swap to Yellow
At layer #35 (1.52mm) swap to Scarlet Red for the rest.