Boite distributrice pour autocollants - Dispenser box for stickers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Boite avec ses supports pour autocollants - Parametric Dispenser box for stickers
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For my personal need, I was searching for a dispenser for stickers. A lot of products are designed to be installed on a table, but my need was to have it on a wall. At the same time the idea was to design a product where everything (support and axes) is included in the original design file.
I created a Fusion(R) project where the size of the support, the diameter of the roll, the number of boxes are included in the parameters to automatically create all the components.
The box is defined by the following parameters. This in French but I give you some information to understand the data.
Dia_Ext which is the length of the box
Boite_Ep the thickness of the box
Centre_Dia the internal diameter of the sticker roll
Boite_Haut the width of the sticker itself
Vitre_Ep the thickness of the support to hang up the boxes
Passage_Dia the center of the dispenser box and the diameter of the support
Boite_Nbre the number of box to install on the support
Jeu the tolerance for assembly of the boxes on the support

I attached the Fusion file for a 43mm sticker, but you can change all parameters as explained here above. The first picture gives you the principal of the support. This means that you don't need to keep in your hand the dispenser box. It is self-maintained by the support.
The boxes are made from PLA+ and the supports are in PETG. In you need to use the dispenser boxes outside and with high temperature, I strongly suggest to also use PETG instead PLA+.
I used different colors because there are so many stickers that the differentiation is easier by color than by the sticker itself.
Pour mon usage personnel, je cherchais un distributeur d'autocollants. De nombreux produits sont conçus pour être posés sur une table, alors que je souhaitais une fixation murale. Par ailleurs, l'objectif était de concevoir un produit dont tous les éléments (support et axes) sont inclus dans le fichier de conception d'origine.
J'ai créé un projet Fusion(R) dans lequel les dimensions du support, le diamètre du rouleau et le nombre de compartiments sont définis par des paramètres, permettant ainsi de générer automatiquement tous les composants.
Le distributeur est défini par les paramètres suivants.

J'ai joint le fichier Fusion pour un autocollant de 43 mm, mais vous pouvez modifier tous les paramètres comme expliqué ci-dessus. La première photo illustre le principe du support : il n'est pas nécessaire de tenir la boîte distributrice à la main, car elle est maintenue en place par le support lui-même.
Les boîtes sont réalisées en PLA+ et les supports en PETG. Si vous devez utiliser les boîtes distributrices à l'extérieur et par forte chaleur, je vous recommande vivement d'utiliser également du PETG plutôt que du PLA+.
J'ai utilisé différentes couleurs car, compte tenu du grand nombre d'autocollants, il est plus facile de les distinguer par la couleur que par l'autocollant lui-même.