Trunk Lid Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Trunk Lid Clip or Holder for the Audi A6 C7 model from 2011-2018.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Spare part for the Trunk lid for Audi A6 C7 model from 2011 - 2018. This design was tested and works for model year 2017.
Print as indicated in the picture and in the .3mf file for correct strength where needed, you will need to use support so suggested is to use same as in the .3mf file.
Printed and tested using a 0.25 size nozzle with 5 walls and 0.15 layer height.
Included is both left and right as well as the pin to secure it better in place, but should work without as well.
The files provided are for personal use at your own risk. I make no warranties, express or implied, regarding the safety, reliability, or suitability of any printed models. You are solely responsible for verifying that any downloaded design is safe, functional, and appropriate for your intended use, including but not limited to material choice, print settings, and post-processing. By downloading or using these files, you agree that I am not liable for any damages, failures, or consequences resulting from their use.