MK8 PRO - SendCutSend mount for stock GT controller box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MK8 PRO mount that doesn't require CNC milling.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this mount to be made through SendCutSend. I suggest countersinking the MK8 PRO screw holes yourself to save money.
If you want to avoid grinding down the standoffs in the GT box, this has to get made in 4.7mm from SCS. It will require washers if your screw heads are not wide enough to grab the plate.
Keep in mind that an AVAspark or similiar stock motor cable adaptor will not work as the phase wires will be too short. I designed it with the superflux adaptor in mind.
The Ennoid LCM WILL work if you cut out the plastic crossbar in the lid above where it goes.