Enclosure for Waveshare ESP32-S3-RLCD-4.2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple enclosure for the Waveshare ESP32-S3-RLCD-4.2 board.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 424
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
A simple enclosure for the Waveshare ESP32-S3-RLCD-4.2 board, consisting of two printed panels, M2.5 standoffs, M2.5 screws and nuts.
More about the project: https://github.com/clackups/draftling
Part list:
M2.5*10mm screws: 4 pc (back panel to the device)
M2.5*6mm screws: 4 pc (front panel to stand-offs)
M2.5*15mm Male-Female stand-offs: 4pc
M2.5 nuts: 4pc (back panel to stand-offs)
Alternatively, Female-Female stand-offs can be used, and screws for attaching the back panel.
Panels print: PLA, 0.2mm, 20% infill.
Edit 2026-08-29: round corners, adjusted height, better access to SD card and USB port.