4mm Bit Magnetizer Sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetize 4mm bits
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Magtizer Sleeve for N52 Neodymium 5 x 1mm:
Version MagneticBit-4mm use 2 x N52( 5x1mm)
Version MagneticBit2-4mm use 4 x N52 ( 5x1mm)
How to use:
Take the bit and place magnets on opposite sides and see if the magnetic fields are aligned, which will attract the screws.
In the bit sleeve, place the magnets in the order shown above. If you place the magnets in the wrong order, simply use the bit tip to remove the magnet from the sleeve.
Can be used as a Magnetic Sleeve or as a Magnetizer by inserting and removing it from the bit a few times.
How to print:
Print with circle towards the bed, or it will get deformed and the magnet wont fit. Use Brim.
Layer height: 0.08
Line Width: 0.2 (all)
Wall: 1
If any problem, try to print slow first
