1 / 3
Traxxas Rustler 4x4 VXL-4s ESC mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Traxxas Rustler 4x4 VXL-4s ESC mount
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Traxxas Rustler 4x4 VXL-4s ESC mount
I had a VXL-4s motor and esc laying around and wanted to make it fit. This is a pretty basic adapter. Mounts ion same location as factory ESC.
You will need to relocate the receiver. I used a cheap aliexpress waterproof receiver box and mounted higher on the chassis above the center driveshaft.
You will also need 2x - 3mmx12mm socket head screws, 1x - 3mmx35mm screw and 1x - 3mmx40mm screw.
I would also use 3mm washers for all fasteners.
Print with 6 walls all around and 25% infill. Should be PLA+ or better for possible heat contact.