Parametric DUST EXTRACTION ADAPTER -- MAKITA DKP181 -> DEXTER 1500W 30L - PARAMETRIC

================================================================================

DUST EXTRACTION ADAPTER -- MAKITA DKP181 -> DEXTER 1500W 30L

================================================================================

A 3D-printable adapter that connects the dust port of a Makita DKP181 /

DCP181Z cordless planer (82 mm) to the suction hose of a Dexter 1500W 30L

wet/dry vacuum cleaner (Leroy Merlin).

Designed to print on a Creality Ender 3 KE without supports.

--------------------------------------------------------------------------------

DIMENSIONS

--------------------------------------------------------------------------------

End Mates with Inner Diameter Length

--------------- ------------------------------- --------------- -------

Makita (bottom) Planer dust port, 50 mm OD 50.4 mm 25 mm

Dexter (top) Vacuum tube, ~34.8 mm OD 35.0 mm 30 mm

Cone transition -- -- 25 mm

Wall thickness : 2.4 mm (3 perimeters at 0.4 mm nozzle)

Overall height : 80 mm

Max diameter : 61.2 mm (stop flange at the Makita end)

Print orientation : vertical, flange end on the bed, no supports

Both ends are female -- the adapter slides over the planer port at the

bottom and over the vacuum's plastic tube at the top. Tolerance is +0.4 mm

relative to the nominal mating diameter, sized for a snug press fit on

PETG.

--------------------------------------------------------------------------------

FILES

--------------------------------------------------------------------------------

adapter.stl Ready-to-slice mesh. Drop into Creality Print / Cura /

PrusaSlicer.

adapter.scad Parametric OpenSCAD source. Edit dimensions at the top,

re-export STL.