1 / 3
Palm Ratchet Support Jig (for ASTRO PRODUCTS Palm Ratchet) — image 1
1 / 3

Palm Ratchet Support Jig (for ASTRO PRODUCTS Palm Ratchet)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This jig improves the usability of the compact ASTRO PRODUCTS Palm Ratchet by adding palm support and fingertip control.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
13
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

[概要]

小型ラチェットスタビードライバー(ASTRO PRODUCTS製パームラチェット)を格段に使いやすくする治具です

[特徴]

  • 手のひら部品は、1/4インチ差込角(6.3mmsq)に着脱することができます

  • 手のひら部品は、底面が平面になっているので、床に置くときに安定します(これ重要!)

  • 手のひら部品は、内側と外側が自由回転するので、手のひらでの位置固定をサポートします

  • 指先部品は、ネオジム磁石によりパームラチェットの1/4サイズ六角ビットの金属筒部分に着脱することができます

  • 指先部品は、1/4インチ(6.3mm)六角ソケットと共通の六角穴になっているので、装着したままで指先でのねじ回しをサポートします

[部品表(印刷数量)]

  • JigPalmRatchetV2-Part_FingerSupport.stl

  • JigPalmRatchetV2-Part_PalmSupprt2.stl
    注記:2026/6/27 PalmSupport.stl不具合があったので更新版に差し替え

[部品表(金属部品数量)]

-ASTRO PRODUCTS 1/4DR パームラチェット x 1

 https://www.astro-p.co.jp/i/2002000024619

  • 差込角1/4DR(6.3mm)のソケットと、1/4サイズビットの両方が使用できる、グリップタイプラチェットです。

  • ラチェット機構は、回転がスムーズなギアレスタイプです。

  • 切り替えリングを回すことで、正転、固定、逆転の回転切り替えが可能です。

   https://www.amazon.co.jp/ASTRO-PRODUCTS-02-24619-4DR-%E3%83%91%E3%83%BC%E3%83%A0%E3%83%A9%E3%83%81%E3%82%A7%E3%83%83%E3%83%88/dp/B01MFBJRJ0?ref_=ast_sto_dp

-ネオジム磁石 外径6mm、高さ2.5mm x 3

[組み立て方法]

  1. 手のひら部品(PalmSupport.stl)は、シリコングリスを隙間に注油し、滑らかに回転するようにします

  2. 指先部品(FingerSupport.stl)は、内側の穴3箇所に接着剤を塗布し、ネオジム磁石を固定します


[Overview]

This jig greatly improves the usability of a compact stubby ratchet driver, specifically the ASTRO PRODUCTS Palm Ratchet.

[Features]

  • The palm component can be attached to and detached from a 1/4-inch (6.3 mm square) drive.

  • The bottom surface of the palm component is flat, allowing it to stand stably when placed on the floor (important!).

  • The palm component has freely rotating inner and outer sections, helping you stabilize the tool with your palm.

  • The fingertip component attaches to the metal sleeve of the palm ratchet’s 1/4-inch hex bit using neodymium magnets.

  • The fingertip component has the same 1/4-inch (6.3 mm) hex socket profile, allowing fingertip screw turning while it remains attached.

[Parts List (3D‑printed parts)]

  • JigPalmRatchetV2-Part_FingerSupport.stl

  • JigPalmRatchetV2-Part_PalmSupprt2.stl
    #Note:PalmSupport.stl had an issue, so it has been replaced with PalmSupport2.stl

[Parts List (Metal components)]

[Assembly Instructions]

1)PalmSupport.stl

Apply silicone grease to the gap so the rotating sections move smoothly.

2)FingerSupport.stl

Apply adhesive to the three inner holes and insert the neodymium magnets to secure them.

Print Settings

Printer Brand:Biqu

Printer:Biqu B1

Rafts:No

Supports:No

Resolution:0.15mm

Infill:30%

Filament: ELEGOO PLA Orange

Category: Hand Tools

Tags