Dust Extractor Adapter (Dexter Plunge Saw -> DEXTER 1500W 30L Vacuum) PARAMETRIC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This project contains a parametric 3D model created in **OpenSCAD** for a dust extraction adapter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Open Community License v1.1
## 📐 Dimensions & Design
The model is based on the standard dimensions of the Dexter tool ecosystem (nominal ~35mm accessory diameter):
- Saw Side: Internal adapter diameter ~35.2 mm (to fit over the 35mm male outlet on the tool).
- Vacuum Side: Internal adapter diameter ~35.2 mm (to fit the 35mm vacuum hose end cuff).
- Friction Fit: The code implements a 1° taper angle to guarantee a tight, secure press fit that prevents accidental disconnects from tool vibrations.
- Internal Stop: An integrated internal shoulder prevents either side from sliding too deep into the adapter.
## 🛠 How to Use in OpenSCAD
1. Download and install [OpenSCAD](https://openscad.org/).
2. Copy the provided code into the editor or open the .scad file.
3. If your caliper measurements indicate slight differences (e.g., due to manufacturing tolerances or wear), adjust the variables at the top of the script:
openscad
saw_ext_diam = 35.2; // Modify as needed
vac_ext_diam = 35.2; // Modify as needed
