1 / 10
[125.7 DB!] Painquakes' 1/3 Scale Thunderbolt Siren (with Roots Blower!) — image 1
1 / 10

[125.7 DB!] Painquakes' 1/3 Scale Thunderbolt Siren (with Roots Blower!)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Reaches over 125 dbA near the horn (with the 4M and single tone chopper)

Rating
0 / 5
Likes
17
Downloads
80
Makes
2
Views
557
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

DESCRIPTION WIP - MORE COMING SOON

UPDATE (10/08/26): The horn and top rotator tube have been updated. It's recommended that you reprint them.

The horn is now thinner and a bit more accurate. I originally thought the end of the horn wasn't a perfect square and was a little taller than it was wide, but I was wrong, so now it's the proper square shape. The new horn weighs a third less than the old one, with a uniform wall thickness throughout. I made the tolerances tighter between the chopper tube and the top rotator tube to get rid of any play between the two. These two changes should reduce or (hopefully) eliminate the lean in the head.

PS: The horn screen had to be updated as well to fit the new horn. The old one will still fit, but it will leave a noticeable gap.

Hardware Needed:
  • 12v 550 DC Motor (Chopper)

  • 605-2RS Bearings (Chopper)

  • 12v 775 DC Motor (Rotator)

  • 608 Bearings (Rotator)

  • M3 Heat Set Threaded Inserts (4.5mm diameter)

  • M3 Bolt and Nut Kit

  • M2 Bolt and Nut Kit

  • M4 Bolt and Nut Kit

  • MY1020 1000W Motor (Blower)

  • M8 x 16mm Bolts (To Mount Blower Motor)

  • M6 Bolts (To Mount 5M and 6M Blower)

  • 12.5mm 2-Channel Slip Ring - https://www.aliexpress.com/item/3256807619099113.html

  • 10mm Metal Rods (4M + 5M Blower)

    • 4M Rod Length: 150mm & 120mm

    • 5M Rod Length: 165mm & 120mm

  • 14mm Metal Rods (6M Blower)

    • 6M Rod Length: 200mm & 160mm

  • 6000-2RS Bearings (4M + 5M Blower)

  • 6202-14-2RS Bearings (6M Blower)

  • 32mm ID x 35mm OD Pipe (Standpipe) - https://a.co/d/09ugZbJR

4M Blower Test - Mini Thunderbolt 4M Blower Test (Unfinished)

First Complete Test - Mini Thunderbolt First Test! (1/3 Scale)

Cart Test - Mini Thunderbolt 1000T Test (now on a cart!)

6M Blower Test - Mini Thunderbolt 6M Blower Test

Test with the Single Tone Chopper - (125.7 DB!) Mini Thunderbolt 1000 Test Blast

NOTES & TIPS

This is my first siren model I have published, so it may not be perfect. This was made using images and videos for reference, and no actual measurements were taken to ensure 100% accuracy. Feel free to make remixes of this model, I do not care as long as you credit my work. I will not make a 1003 as I don't have a reliable way of making the slip rings for the solenoids, but I may make a B-series head in the future. This is not a competitor to Haroldhihat's mini Thunderbolt, theirs is admittedly way better.

As for the roots blower, the reason why you don't see many mini Thunderbolt models including one is because it's a pain to get working. It will not work right off the printer, you need to sand down the lobes and the casing until it's easy to turn by hand. I recommend getting a bearing puller, as you will likely need to disassemble and reassemble the blower a number of times to get the tolerances right.

I will try to answer any questions you may have on the assembly or the model in general.

Tags