SFF Mini ITX Steam Machine Case v2 Airflow

Thanks to the YouTube creators that took time for doing their makes. Really glad and happy for that

UPDATE3: More interior room (3mm longer) for better GPU fitment. Power switch holder fused with front shell
UPDATE2: Fixed screw holes, to have better tight
UPDATE: I fixed lower plate rounds of MB standoffs and front plate lower screws holes 

For this you need:

• Screws 6#32 all by 8mm long, I recommend to buy long screws and cut them with tweezers or dremel (I resized holes to use just one size screws): 

  • 12, back and front plates

  • 4, flex or sfx PSU

  • 2, USB bracket

  • 4, motherboard
    

• 12 magnets (3x10mm)
  

• CPU cooler:

  • cooler master hyper 212 compatible up to 190mm height (flex_backpanel)

  • Noctua NH-U9S compaitble up to 130mm height (sfx_backpanel)
    

• GPU card:

  • Power color rx 9060 xt compatible, up to 200mm long
    

• Motherboard;

  • Any mini ITX
    

• Front fan:

  • Either 140 or 120mm fans up to 25mm thick
    

• Rear fan:

  • 92mm fan 25mm thick (sfx_backpanel)

  • 120 or 140mm of 25mm thick (flex_backpanel)
    

• USB 3.0 2x cable, the 0.3m is enough. https://es.aliexpress.com/item/33046797763.html?spm=a2g0o.order_list.order_list_main.20.2bd2194dgvI5wu&gatewayAdapt=glo2esp
  

• Power led switch button 60cm cable and 19mm diameter. For better fit, weld some different cables or use a low profile button, just needs to be 19mm diameter. https://es.aliexpress.com/item/1005005585121134.html?spm=a2g0o.order_list.order_list_main.189.2bd2194dgvI5wu&gatewayAdapt=glo2esp
  

• 4 scotch 21mm diameter rubber stops for feet