Magnetic Lamp Post Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-piece clamp originally designed to mount a 3D-printed Metallica name logo
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a functional, two-piece clamp originally designed to mount a 3D-printed Metallica name logo I designed to a standard post-type floor lamp (as seen in the image). However, because it features an integrated magnet pocket, it can easily be adapted for mounting anything lightweight utilizing a magnet to a post!
The front of the clamp features a pocket for a flush-fit disk magnet, while the reverse side includes recessed slots designed to lock nuts in place.
Hardware Required
Bolts: (2) 5.5 x 10mm bolts
Nuts: (2) Matching nuts (Square nuts work best here to prevent spinning inside the recessed slots)
Magnet: (1) 10 x 2mm round neodymium magnet
Technical Dimensions
Inner Diameter (ID): 1.46 inches
Length: 2.3594 inches
Ring Thickness: 0.0625 inches
Clamping Gap Freeplay: 0.04 inches
Recommended Print Settings
Material: PLA (or PETG for a bit more flexibility)
Layer Height: 0.20mm
Infill: 10% – 20%
Supports: None required!
Note: The Metallica name logo shown in the example photo can be found here: