Evenmore Macro V6
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Big single conversion from 2x5015 -> 1x 12032 Compatible with the micro v6 filter for extra fun
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- CERN Open Hardware Licence Version 2 - Strongly Reciprocal
Behold...
Use your auxiliary fan, or a spare 12032 blower fan as your new nevermore V6
Despite the Nevermore Micro master folder containing around 150 files for different variations of V4, V5, & V6 filters it just couldn't quite scratch a particular itch.
Why should we be restricted to well engineered and tested products in aesthetic micro packages when there's a honking chonky 12032 blower fan sitting just across the enclosure from it?
The current filter designs for the 120mm blowers all seem to be based around a standard mounting location and mostly for K1's and Bambu's.
This Girthy granny is (unsurprisingly) pretty long....as in "if your z axis is less than ~360mm then GG" type of long. It should be able to mount snugly between the central rear z extrusion on Voron Trident's & ZeroG Hydras.
I haven't tested all the parts yet, but i can confirm the 12032 blower does fit and bolt into part #1, as well as the adaptor section matching up to the V6 filter/duct patttern, so will update as I print the rest
Hardware:
3* M3x4x5 heatserts (these go in part #2)
8* 6mmx3mm magnets (for atttaching part #1 -> #3(a || b)
If you wish to attach a second filter stage, or any of the V6 output ducts, then you will also need:
8* 4mmx6mm magnets
Update:
5/8/26: made the ducting webs in the first filter 0.5mm thicker as i fear some resonance issues with the initial offering, this thiccer update is part 3a_a... Future updates include a fix for that retched filter screen thing i thought was a good idea to hold the carbon in
The filter section will be fine if you do not require supports for this....however i do and the vertical slats decided to remove themselves with the roof support
Note to future self or someone else: Change filter section to have seperate roof section again (for myself, revert to old design and upload)