FiiO M21 Travel case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hard case to pack the FiiO M21 DAP in it's factory sleeve. Suitable for backpack or car.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
Travel case for the M21. Print the case in any any plastic you like but remember if you're going to have it in a summer sun hot car, you probably want to avoid PLA. 2+ walls +15% infill.
You'll need 6 M3x18 or 20mm screws for the hinges and latches.
For the padding if you use it. Print in TPU. Set your slicer to 2 bottom walls 0 top and 10% honeycomb infill. Just glue it in. If you use superglue make sure to let it fully dry and out gas before you lock your M21 in there with the fumes.
If you have a multi color printer. I include some logo STL's you can mess around with.
And remember this is just the output of an OpenSCAD project. Links for the original box library etc are in the parent works files. You can make all sorts of cases for your gear with the original.