Locking clip for Ikea Samla box 45L and 65L
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.21 – €0.26 net (excluding VAT)
For file: SamlaClips_1pcs_45_65_0.3mm_PETG_MK3S_14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.23 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 14.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Perfectly adjusted clips, no support required and optimized print time
- Rating
- 4.929 / 5
- Likes
- 56
- Downloads
- 555
- Makes
- 16
- Views
- 1,379
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes.
You may also place the clip over the reinforcers bridges under the lid. No contraints :)
Print instructions
You can print in 0.3mm layers and should NOT use 100% infill but instead setup your slicer to use “100” perimeters and ensure that the whole part will be printed as perimeters. It prints faster, is more robust and garanties the best bending properties.
You can find gcode to print directly:
- 4 parts - 10 min - for 1 box
- 8 parts - 1:20
- 12 parts - 2:00
- 20 parts - 3:19
I had no problems on my MK3S+ to print batches with a speed of 115% to reduce print time even further.
Other sizes
You can also find a model with similar mechanical properties and design for 11L & 22L boxes here:
https://www.printables.com/model/176648-locking-clip-for-ikea-samla-box-11l-and-22l