Ichigo HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Depend on the white you have will give different result
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.5x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.2mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#ebebeb PLA Protopasta Opaque White Transmission Distance: 7
#ff7900 PLA Kexcelled Fluorescent Orange Transmission Distance: 6.5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Opaque White
At layer #10 (0.88mm) swap to Fluorescent Orange for the rest.