1 / 7
Carnival of Sins storage box — image 1
1 / 7

Carnival of Sins storage box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A storage box for Carnival of Sins

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
62
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

A storage box for Carnival of Sins

here are the construction steps and the assembly video.

You will need:

  • 8 M4 screws (12mm +/- 5mm long)

  • Clear tape (ideally quite wide)

  • Strong glue

  • Optional an NFC chip (circular) for scanning the rules

Instructions for printing the various parts

For the "Plata Carnival of Sins": 0.2mm layer height

  • Gold filament

  • Filament change to white at the 6th layer

  • Filament change to black at the 9th layer

For the "Plata mask," 0.2 mm layer height:

  • Gold filament

  • Filament change to black at the 6th layer

For the slice with a 0.2mm layer height:

  • Black filament

  • Filament change to gold at the first layer

For the NFC option:

  • Print "nfc rules versus" with a mid-print filament change for a better look.

  • Print "box 1with nfc slot" with a pause to insert the "nfc rules versus" piece and the NFC chip, then resume printing.

Step-by-step instructions

  • Take "Box 1" (optional version with NFC chip slot)

  • Insert the "slide" and the "plate Carnival of Sins"

  • Place "Box 2" over the assembly

  • Insert the M4 screws and tighten

  • Place "box 3" next to "box 2".

  • Use "join 1" in the notch to connect "box 2" and "box 3".

  • Use "join 2" to secure "box 2" and "box 3"; press firmly to insert "join 2".

  • Add the "slide" and "plate mask"

  • Place "box 4" on top

  • Secure with the 4x M4 screws

For the score sheet:

print  "score" (Switch filaments to create a visual contrast between the lines and the text area; it will look much nicer) and "plate score"

  • Place clear tape over the word "score" (Don't hesitate to fold the excess tape back against the sides.)

  • Use super glue to attach the "plate score" behind the "score" to hide the excess tape.

finished

Tags