Straw holder & dripper
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.36 – €1.66 net (excluding VAT)
For file: Straw holder & dripper_inside_0.4n_0.25mm_PLA_MK4S_1h19m_bed1.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.51 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 1.31 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An easy to print straw holder & dripper. Feel free to ask anything <3
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 6
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing time +- 4 hours
Layer height: 0,25mm
I printed every piece separately and every time I added 3DLAC for safety. The inner part doesn't need any supports or anything else. For the outer part I added 5 mm brim (0,2 mm offset) and for the wall holder I added tree supports (only on the print bed) as you can see in the picture.
My supports settings are in the picture :) They go down beautifully.
I had no problems with stability during printing.
All parts fits soo perfectly together.
The holes on the wall holder are 3,8 mm wide.