1 / 5
Metabo TS 254 / TS 254 M   rip fence featherboard  add-on — image 1
1 / 5

Metabo TS 254 / TS 254 M rip fence featherboard add-on

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Metabo TS 254 / TS 254 M featherboard add-on for the fence and miter slots

Rating
5 / 5
Likes
8
Downloads
63
Makes
1
Views
248
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Add-on to mount a featherboard to the fence of an Metabo TS254 / TS254M  Tablesaw

This add-on fits the original rip fence of the Metabo TS 254 table saw.

Parts list:
- 2 x Square-Neck Carriage Bolts M6 x 30
- 2 x hex head bolts M6 x minimum length 30 mm
  preferably 60 mm if you want to use spacers to get farther away from the fence
- 4 x M6 hex nuts
- 4 x washers with an outer diameter of 20 mm

You can also use the knobs with smaller washers or without any shims at all.
With the larger washers, you can tighten them more securely, and there won't be any marks left behind.

The hex recesses are very tight; if necessary, insert the screws and nuts with a little pressure.

The alignment on the print bed is shown in the image.

Printed with:
Spectrum Premium PLA Tooling Dark Green
Spectrum  / The Filament HT-PLA Tooling Dark Green (use brim ! ; tends to warp)
The color is very close to Metabo green.

Print settings:
For the knobs, I selected a sacrificial layer for counterbore holes
- Nozzle 0.4
- Layer height 0.24
- 4 walls, 12% infill

I’ve also designed a featherboard with runners for the miter slot on the table saw; you can find them here.

included STEP files to easy modify

happy printing, have fun!

IF THERE ARE ISSUES WITH THE DESIGN PLEASE LEAVE A COMMENT OR SEND ME A MESSAGE

Tags