DH/MTB bar end plate V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d printed bar end plates inspired by revgrips prototipes seen on reece wilson bike
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 74
- Makes
- 0
- Views
- 312
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3d printed bar end plates(is that the right name?) inspired by revgrips prototipes seen on reece wilson bike, i liked them the most when (part 1) printed out of TPU 95A with 30% infill and 1.8 top/bottom thickness, i recommend printing part2 with a rigid filament like PETG.
Make sure the new part2 has a thick bottom or else it wil break when tightening down the barend and part3 needs to be printed with 100% infill.
To assemble them you need an m4x25 and a nut for each barend.
If you want to make some changes i included step files, or you can check out this onshape lik:https://cad.onshape.com/documents/282e40acfeab6165cacc2d37/w/bd8a8228ad93672eeffc5757/e/c31692d5fe46d69f5d156ca3?renderMode=0&uiState=69ad38452d5ce4d9488b49ff
Tags