1 / 2
Telescopic compression for tubes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Adjustable compression fitting with low tolerance which allow change height of pole.
Mop-like
Top tube is 10.5mm, bottom tube is 13.4mm
Thread is 4mm pitch
Do not need support. All printable without support in PLA at 0.8 nozzle in draft mode. Except violet part which need better quality(not tested at 0.8 nozzle, may work).