Protected wall mount with tray and wire hole

This is a wall mounting system that can be used for any object's protected mounting to a wall using a geodesic dome.

This was originally designed for the 6' magnetic antenna of the Denon Pro DN-200BR audio Bluetooth receiver, and along with a version of the bracket with a tray designed for it, the included dome and ring models are sized for it specifically, but it can be used for any object's protected mounting to a wall if you make a copy of the Onshape project linked below or download the STEP files and adjust a few things. It uses a 3-part design with (1) a bracket that is mounted to the wall via two screws and holds the tray for the receiver with channels cut into it for the wires (an optional version that has no tray is also provided), (2) the protective geodesic dome, which clips onto the bracket and distributes loads evenly across itself, and (3) the security ring, which goes over the clips and has 4 more screw holes to secure it into the wall to provide extra strength and security.

The protective dome is extra thick, even when printed in cheap PLA is it VERY strong due to the geodesic dome design. On the Denon Pro DN-200BR antenna version of the bracket, the zip tie holes on the bracket for securing the antenna might not work for everyone, so you might have to drill bigger holes or design bigger holes in using the included free STEP files or use a different strap-like method to secure the receiver. It is designed for a receiver bigger than the actual one because I did not have access to real measurements of the thing when designing it. All included versions have two holes on the bracket that are 6.35mm in diameter and 4mm thick. They are smooth with no threads or fillets applied. The four holes on the security ring are 3mm in diameter with a 1mm fillet applied to the top of each of them, and they are 12mm thick in total with the fillet and 11.5mm not including the fillet. Just like the other holes, they are smooth holes with no threads or modifications other than the fillets.

I designed the model completely by myself, with the exceptions of this public geodesic dome design I found on Onshape: https://cad.onshape.com/documents/a4110ace3d6508387cf5f88e/w/884959aa1e3c3b72f26779fc/e/2dc1d61167b4c99b1f01ffaa?renderMode=0&uiState=6a42e3c0e8aee1504ebb0a7e (by REN JAM) which I used as inspiration for my dome design (I derived it to my project and them make a few edits, so technically it wasn't "inspired" literally).

My public Onshape design is here: https://cad.onshape.com/documents/a4110ace3d6508387cf5f88e/w/884959aa1e3c3b72f26779fc/e/2dc1d61167b4c99b1f01ffaa?renderMode=0&uiState=6a42e526e8aee1504ebb10cb.

Remember, you are God's most prized possession, and nothing can change that.
Deuteronomy 14:2 ESV: “For you are a people holy to the Lord your God, and the LORD has chosen you to be a treasured possession, out of all the peoples who are on the face of the earth.”