ENFit Connector Cap Slide Stop Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple clip to prevent the dust cap for an ENFit connector from sliding away along the attached tubing.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 22
- Makes
- 1
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution
If you've ever used an enteral feeding bag equipped with ENFit connectors, you've probably noticed the little dust cap likes to disappear along the tubing and can be rather annoying to drag it back to the connector when needed. To solve this issue, I create this simple clip which is placed on the tubing a few centimeters from the ENFit connector which prevents the dust cap from sliding down the tubing. With this clip applied, the dust cap is always within reach when you need it.
Inevitably, a clip occasionally gets left on the tubing when the bag is discarded, so I recommend printing out a few so you have some spares on hand for when this occurs.
I recommend printing with no larger than a 0.4mm nozzle. 0.1-0.2mm layer height. I used PETG, but any material should be fine.