French Cleat Tool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple toolholder for a french cleat wall, using PVC pipes. The bottom part is glued to the pipes with cyanoacrylate,…
- Rating
- 0 / 5
- Likes
- 63
- Downloads
- 118
- Makes
- 1
- Views
- 1,555
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Simple toolholder for a french cleat wall, using PVC pipes.
The bottom part is glued to the pipes with cyanoacrylate, and I poured in sodium bicarbonate to fill the gaps and help set the cyanoacrylate, and then poured out the remainded.
Cutting the pipes straight was the hard part :P I ended up just using a small metal hacksaw, and going slowly, clean up with a dremel and some sand paper, and then smooth the edge with a lighter.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
3 walls for added strength
Category: 3D Printing