HAPE Quadrilla Changing Tower Red
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I saw this tower here and print it. Tried to print it with and without supports, but it does not work for me. So I…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I saw this tower here and print it. Tried to print it with and without supports, but it does not work for me. So I decieded to print parts and put them together with screws.
Print "HAPE Quadrilla Turm Rot Wechsler1.stl" twice with a resolution of 0.1 because of the little holes for the screws.
Attention: Do not overthighten the two screws of the slide.
I founded a group for the HAPE Quadrilla marble run: https://www.thingiverse.com/groups/hape-quadrilla-marble-run
Have a lot of fun with it.
Print Settings
Printer Brand:
Anycubic
Printer:
Predator
Rafts:
No
Supports:
No
Resolution:
0.1 and 0.2
Infill:
20 or 25%
Filament: Filamentwerk PLA red Post-Printing =============
You will need 8 screws 3,5 x 16 mm, 2 screws 3,5 x 20 mm for the slide
Category: Construction Toys