Hueforge Audi Quattro S1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge Audi Quatro S1 Group B rally car
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Open Community License v1.1
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133.33mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#ff511e PLA Copymaster 3D Pumpkin Orange Transmission Distance: 6.6
#f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
#fff016 PLA Copymaster 3D Mellow Yellow Transmission Distance: 6.2
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Pumpkin Orange
At layer #13 (1.12mm) swap to Hot Pink
At layer #17 (1.44mm) swap to Mellow Yellow for the rest.
if you like my hueforge please subscribe youtube.com/@3dmetehan