Mix and match electronics project box case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed my previous purpose built design into something more generic anyone could use.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of my Compact case for MikroTik wAP AC access point model. That model was device specific and purpose designed. I removed the holes for the access point features along with the board supports in the case. I expanded the side vent holes I had to remove to make the original design work. Also I put openings on both sides in some models so you can make custom ends. Cases and covers can be mixed and matched how you see fit. TLDR I made the case more general use friendly.
Cases are all 32.5 mm tall and have a footprint of 97.2x75.25 mm
Covers are 3.25x75.25 mm and add 3 mm of thickness. There is another 2 mm that sticks inside the case for alignment and good connection.
Screw holes are designed around a M2 screw up to 10mm long and with a 4 mm diameter head.
Want to support what I do? Check out my eBay listings: https://www.ebay.com/sch/i.html?_nkw&_in_kw=1&_ex_kw&_sacat=0&_udlo&_udhi&_ftrt=901&_ftrv=1&_sabdlo&_sabdhi&_samilow&_samihi&_sadis=15&_stpos=68502-1833&_sargn=-1%26saslc%3D1&_salic=1&_fss=1&_fsradio=%26LH_SpecificSeller%3D1&_saslop=1&_sasl=gwzcomps+professionalrecycling402&_sop=10&_dmd=1&_ipg=60&_fosrp=1