Marmita Air Filter - VOCs + Particulates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact, modular 3D printer filter. Stack HEPA/carbon or run standalone/integrated based on your filtration needs.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Project Marmita - Modular & Stackable 3D Printer Air Filter
Heavily inspired by the bentobox, Marmita (the Brazilian Portuguese word for a stacked lunchbox) is a highly versatile internal air filtration system designed for enclosed 3D printers. It sits inside your printer enclosure to scrub toxic VOCs (Volatile Organic Compounds) and microplastics generated when printing technical filaments like ABS, ASA, and Nylon.
The core philosophy of Marmita is ultimate modularity. Just like a real lunchbox, you stack the layers based on your specific filtration needs.
Thanks to its interlocking geometric design, the compartments are fully interchangeable. You can print and stack them in any order or quantity you want:
Air Circulation Mode (Fan Base Only)
Anti-Odor Mode (Fan + Carbon Stage)
Particle Defense (Fan + HEPA Stage)
The Full Meal (Fan + HEPA + Carbon): The standard setup. Air passes through physical filtration and chemical neutralization before recycling back into the chamber.
The "Super Stack": Printing heavy materials in a large enclosure? You can stack multiple carbon or HEPA modules in series.
Why "Marmita"?
Compact & Filament-Friendly: Engineered from the ground up to have the smallest footprint possible inside your enclosure while consuming minimal filament during printing.
Toolless Maintenance: Did your carbon saturate before the HEPA filter got dirty? No need to unscrew everything. Just slide or un-snap the specific "lunchbox" compartment, refill it, and stack it back up.
Zero Waste Scalability: If your setup requirements change next month, you don't throw your filter away. You just print an extra module and add it to your existing stack.
Budget-Friendly: Designed to use widely available, inexpensive consumables (like standard vacuum HEPA filter replacements and aquarium-grade activated carbon pellets).
Bill of Materials (BOM) & Assembly
1 or 2 5015 fans (Choose 5V, 12V, or 24V depending on your power option)
Granular Activated Carbon (acid-free).
80x40x15mm HEPA filters from ilife vacuum robots.
2x M4x5x4 inserts
CRITICAL: Use pelletized, acid-free activated carbon. Acid-washed carbon will corrode your printer's linear rails and electronics.
Power & Control:
It can be wired in two ways:
Printer Integrated: Wired directly to your printer's mainboard, allowing it to be powered and controlled via G-code/Klipper macros.
Standalone: Using an external, individual power supply plugged directly into the wall.
Print Settings
Material: PLA should be fine, I've printed mine in PETG. ABS or ASA should be an overkill unless you print with very high chamber temperatures.
Infill: 15-20%
Perimeters/Walls: 3 or 4 (the more walls, the less noise from the fans
Supports: Just on the sliding mechanism in the base.
